Home / Products / Shielding Paints / AQUACOND-G05

AQUACOND G05 Graphite Dispersion

Name: AQUACOND G05 Graphite Dispersion
Brand: YSHIELD
SKU: 1810

B2B

AQUACOND G05 Graphite Dispersion AQUACOND-G05

Water-based graphite dispersion with a 5 µm particle size; for thin-film conductive coating formulations.

Particle size: 5 µm
Packaging: 1 L / 5 L

Manufacturer: YSHIELD GmbH & Co. KG — Germany. Delivered in the original packaging with the manufacturer's warranty.
SKU: 1810 | EAN / Barcode: 4260103668026

Technical Specifications

Colour	Dark gray Solvent: Water Dispersing additive: Nonionic G05 Pigment: Natural graphite d50 = 5 µm; d90 = 10 µm;
Density	1.31 kg/l Solid content: 39.5 % VOC content: 0 g/l Ingredients: Water, natural graphite, carbon black, additiv

Sales Units and Barcodes

Variant	SKU	EAN / Barcode
Graphite dispersion 5 µm / 5 litres	1810	4260103668026
Graphite dispersion 5 µm / 1 litre	1815	4260103668019
Sample set / 4x 1 litre	1824

Application Notes

Conductive shielding paints are the most common structural solution against high-frequency (HF) sources such as mobile base stations, 5G, Wi-Fi and radar, and against low-frequency (LF) electric fields originating from building wiring. All YSHIELD paints are water-based and free of solvents and plasticisers, and their production is audited by TÜV-SÜD. After application the surface must be grounded and can then be finished with any water-based interior or exterior paint of your choice.

Grounding is mandatory: Conductive shielding paints only protect against low-frequency electric fields and meet electrical-safety requirements when installed together with suitable grounding components. Let us plan the right grounding set for your project — Grounding Systems.

Application Areas

Wall/ceiling shielding in flats and offices with a base station on the building opposite
Whole-room shielding in bedrooms and children's rooms
The structural layer of TEMPEST/RF-secure meeting rooms and server rooms
Medical practices, clinics and laboratories adjacent to sensitive equipment
Complete shielding of the building shell on exterior façades
High-frequency protection against 5G and mmWave sources

Installation and Application

Surface preparation: the surface must be dry, clean and sound; absorbent surfaces are primed with GK5 primer concentrate.
Application: the paint is applied by roller in one or two coats (depending on the target attenuation). One litre covers roughly 7.5 m²; continuity must be maintained at corners and transitions.
Grounding: the dried film is conductive; grounding with GS-series plates, connected by a licensed electrician, is mandatory.
Top coat: it is covered with any water-based interior/exterior paint of your choice; the shielding performance is unaffected.
On surfaces at risk of cracking, AF3 carbon-fibre additive is mixed into the paint to preserve electrical continuity.

Care and Service Life

Once dried, the shielding film needs no maintenance; the decorative paint on top can be renewed as usual. Where holes have to be drilled in the wall (hooks, shelves), small holes have no practical effect on performance; in larger renovations, cut areas should be bridged with HNX tape or a touch-up of shielding paint.

Frequently Asked Questions

Should I apply one coat or two?

It depends on the measured field strength: for moderate sources one coat (46 dB with HSF54) is usually enough; with high exposure or a low target value, two coats (53 dB) are recommended. We settle this together at the survey stage.

What paint goes on top — does the colour change?

The shielding paint is a black intermediate layer; it is covered with any brand of water-based interior/exterior paint, in the colour of your choice. Two finishing coats are usually enough to hide the dark colour.

What happens if it is not grounded?

The high-frequency attenuation is largely retained, but there is no protection against low-frequency electric fields and the electrical-safety requirement is not met. That is why grounding is mandatory.

What about the windows?

Paint shields only opaque surfaces. The system must be completed with RDF window films or shielding net curtains for the glazing; otherwise the waves keep coming in through the glass.

Delivery and Warranty

Products are delivered in the original YSHIELD packaging, with the manufacturer's warranty, by insured shipping throughout Türkiye. Products sold by the metre are cut to the length you order; for project-based orders the delivery schedule is settled at the survey.

According to the manufacturer YSHIELD, its products are used in more than 150 countries by corporate customers including brands such as Adidas, Amazon, Apple, Airbus, ASML, Google, IBM, Mercedes-Benz, Microsoft, Nike and Siemens.